Personal Protection Equipment for Surface Preparation

Stock No: PPEBS405
Airblast heavy-duty blast suits protect the operator from the impact of rebounding abrasive. Heavy cotton fabric is reinforced to areas of impact with leather panels. Cuffs and ankles are secured with a buckle to stop abrasive from penetrating the suit. Available in all sizes.

Stock No: PPEADS12
Aerosol disinfectant spray to suit all types of protective helmets, ideal for blast helmets and paint spray hoods

Suitable for broad spectrum microbiocidal, together with fungicidal and algaecidal activity. Controls Legionelle Pneumophila.

This powerful formulation disinfectant spray prevents the spread of potentially dangerous germs. Aerosol container holds 400ml.

Stock No: PPECISH
Heavy duty all cotton hooded blast suit ideal for many operations in blasting and painting. Features: reinforced seat, knee and elbow sections: hood with tie-cord, elasticated cuffs and ankles with a crossover, velcro seal. This pocketless fitted suit is ideal for the blast room.

Available in all sizes.

Stock No: PPEPDS1
One-piece hooded zipped suits and hoods made from durable Tyvek. With sealed seams, they give excellent protection against dust paint splashes, rust and dust. Overshoes also available.

Stock No: HOSEBL10 & 20
1/4” quality breathing air hose made from reinforced polyester with high quality, clear PVC liner. Fitted with 1/4” brass swivel couplings for ease. Tested for working pressures of up to 250psi, to BS 6066.

Stock No: PPEAPHLP60
One of the most popular helmets in the UK market, its enduring popularity stands testament to this helmet’s comfort and affordability.

Stock No: PPEED1
Just part of a range of ear defenders, developed to meet widely differing individual requirements or site conditions. The products are suited to the most varying sources of noise, both indoor or outdoor, enabling you to work in greater safety and security. Slimline defenders provide greater comfort and mobility when worn beneath blast helmets.

Disposable ear plugs are also available.

Stock No: PPEFILABP2
Airblast Model 41 air breathing filter with pressure regulator. A seven stage filter which removes all oil, mist and vapour, down to 0.5 microns. Minimum spares requirement, with long-life cartridge, encased in a corrosion-proof plastic, incorporating the sealing gasket. 1/4” line takeoffs. Rugged steel construction. Free standing or wall mount to suit.

Stock No: PPEGELB88
CE Approved - Airblast Bullard 88 Air-Fed helmet is the result of years of field proven experience in performance and research, giving operators greater protection and comfort than ever before. Wider and deeper than most other brand helmets, allowing full comfort for the wearing of glasses or communication system head sets. Optimum visibility with wide view angle face shield. Double shell construction provides top impact, sound and penetration protection. Our best selling blast helmet.

Stock No: PPEHELPAN
The Panorama CE Approved blast cleaning helmet offers good protection against grit and dust raised in blasting operations. The helmet, supported by an adjustable headband, made from fibreglass. With an outer rubber cover taking care of abrasion and absorbs noise. Fitted with elliptical lens holder with polycarbonate safety window and removable cape. PVC coated nylon, and cotton inner bib. Air supply hose is fitted to waist detachable muffler.

Stock No: PPEHELPRO
The Protecta helmet is manufactured from fibreglass, supported by an adjustable headband. Fitted with a large, oblong, hinged visor with a glass outer and acrylic inner lens. Detachable protective cape made from abrasion resistant PVC coated nylon attached to the helmet by a tension ring. Inner muffler zipped to the cape using a zip.

Stock No: PPEPSHAC1000
The AC1000 Series cools incoming air from compressed breathing air sources by as much as 30°F (17°C). It helps maintain worker comfort and maximize productivity while working in extremely hot and humid environments.

The AC1000 Series features an adjustable airflow control valve that allows the user to adjust the incoming air temperature to a level best suited to individual comfort.

Stock No: PPEPSHAC2400
The HC2400 cools or warms incoming air from compressed breathing air sources. It is ideally suited for early spring or late fall when the air needs warming in the morning and cooling in the afternoon.

When used in the cool mode, the Hot/Cold Tube decreases the incoming air temperature by as much as 30°F (17°C). When warm air is desired, the incoming air temperature may be increased by up to 30°F (17°C).

The HC2400 Series features an adjustable airflow control valve that allows users to regulate the temperature of incoming air to a comfortable level.

It is simple to convert the HC2400 from cool air to warm air or warm to cool. It takes the worker just seconds to convert from one mode to the other and then resume work activity.

Stock No: Various
Airblast stocks a wide range of protective leather, cotton and rubber blasting gloves, gauntlets, and surgical paint spraying gloves.

Protective Footwear is vital for safe blasting. Airblast stock a steel-capped shoes and boots-pull-on or laced, water, chemical or electrical resistant - for all site conditions. Over-shoes are also available. All boots exceed standards laid down by BS 659 with safety features to BS 1870.

Stock No: Various
Cartridges are available for many breathing filters on the market. Listed below are some of the more popular. If you don’t see the type you require our Sales/Technical departments will be happy to find it for you.

Stock No: Various
Airblast’s own generic brand safety lenses for all blasting helmets on the UK market: Apollo 60/50, Bullard, WV90 / WV Mk II, Noble, Panorama, Defender, Warrior, Black Knight, etc.