Personal Protection Equipment for Surface Finishing

Stock No: HOSEBL10 & 20
1/4” quality breathing air hose made from reinforced polyester with high quality, clear PVC liner. Fitted with 1/4” brass swivel couplings for ease. Tested for working pressures of up to 250psi, to BS 6066.

Stock No: PPEADS12
Aerosol disinfectant spray to suit all types of protective helmets, ideal for blast helmets and paint spray hoods

Suitable for broad spectrum microbiocidal, together with fungicidal and algaecidal activity. Controls Legionelle Pneumophila.

This powerful formulation disinfectant spray prevents the spread of potentially dangerous germs. Aerosol container holds 400ml.

Stock No: PPEFILABP2
Airblast Model 41 air breathing filter with pressure regulator. A seven stage filter which removes all oil, mist and vapour, down to 0.5 microns. Minimum spares requirement, with long-life cartridge, encased in a corrosion-proof plastic, incorporating the sealing gasket. 1/4” line takeoffs. Rugged steel construction. Free standing or wall mount to suit.

Stock No: PPEPDS1
One-piece hooded zipped suits and hoods made from durable Tyvek. With sealed seams, they give excellent protection against dust paint splashes, rust and dust. Overshoes also available.

Stock No: PPEPSH20ABT
Airblast CC20 air fed spray mask gives excellent comfort for all operators spraying or working in dusty environments. A large, (6.5” x 14”/165mm x 350mm), lightweight window makes this mask superior to most. Available with tear-off lens if required. Designed to be used with the Airblast 41 filter and/or climate control tubes. Supplied complete with belt and air control.

Stock No: PPEPSHAC1000
The AC1000 Series cools incoming air from compressed breathing air sources by as much as 30°F (17°C). It helps maintain worker comfort and maximize productivity while working in extremely hot and humid environments.

The AC1000 Series features an adjustable airflow control valve that allows the user to adjust the incoming air temperature to a level best suited to individual comfort.

Stock No: PPEPSHAC2400
The HC2400 cools or warms incoming air from compressed breathing air sources. It is ideally suited for early spring or late fall when the air needs warming in the morning and cooling in the afternoon.

When used in the cool mode, the Hot/Cold Tube decreases the incoming air temperature by as much as 30°F (17°C). When warm air is desired, the incoming air temperature may be increased by up to 30°F (17°C).

The HC2400 Series features an adjustable airflow control valve that allows users to regulate the temperature of incoming air to a comfortable level.

It is simple to convert the HC2400 from cool air to warm air or warm to cool. It takes the worker just seconds to convert from one mode to the other and then resume work activity.

Stock No: PPERD4251
Organic vapour/ particulate respirator for concentrations below 65oc, 10 x OEL or 1000ppm, whichever is lower. Suitable for use under COSHH meets EN405 FFA IPI. This quality, low cost mask is lightweight, adjustable and therefore ideal for many applications.

Stock No: Various
Cartridges are available for many breathing filters on the market. Listed below are some of the more popular. If you don’t see the type you require our Sales/Technical departments will be happy to find it for you.

Stock No: Various
A single air line supplies breathing and spraying air.
Waistbelt incorporates odour filter and pre-set vizor air regulator.
Vizor is supplied with both foam and fabric face seal cassettes.
The vizor is hinged with adjustable crown strap and ratchet headband.
DeVilbiss breathing systems are fully approved to EC directives and CE marked for total operator confidence.

The MPV Air-Fed Face Vizor outfit provides the effective, practical and comfortable solution for operator respiratory protection.