Small
Modular Style Blast Room With Fixed Point Vacuum Grit Recovery
Our Client required to have a small
facility for preparing his fabrications for painting. He initially
came to us for a 10ft containerized system however on full investigation
it became apparent that the required width of the container was
insufficient.
| |
| Location
of Proposed unit |
Inside
existing factory |
| Units
Working Hours per Day |
Minimal,
this application only called for 2-3 hours painting per day
|
| Internal
Dimensions |
5mt
long, 4mt wide & 3mt high |
As the client intended locating the facility inside
his factory a modular system was suggested as a way around the insufficient
width of the container. Despite initial concerns it was demonstrated
that could be achieved a little further cost. The room was equipped
with a fixed-point recovery device to cope with the intermittent
use intended for the facility. Due to the size of the unit a shaker
dust extraction system was selected.
| |
| Facility
Type |
Modular Dry Back |
| Weather
Proof |
No |
| Internal
Dimensions |
5mt
long, 4mt wide & 3mt high |
| Grit
Recovery |
Vaculift
|
| Dust
Extraction |
Reverse
Jet |
| Safety
Alarm System |
Included |
More
information on all the products mentioned in this case study could
be found at Blast Rooms.
|
